OBD-II code · Powertrain (generic)
P076D Shift Solenoid H Electrical
General electrical fault on the shift solenoid H control circuit — open coil, short to ground or battery, driver feedback outside range.
Is it safe to drive with P076D?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyOpen solenoid coil
- PossibleDamaged wiring at the transmission connector
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 1–5 h
- Emissions test
- Usually unaffected
- Parts involved
- Shift Solenoid H, Tcm, Wiring Harness
Related codes
- P0753Shift Solenoid A Electrical
- P075DShift Solenoid G Electrical
- P076AShift Solenoid H
- P08CFShift Solenoid J Electrical
- P08D8Shift Solenoid K Electrical
- P08E1Shift Solenoid L Electrical
- P2709Shift Solenoid F Electrical
- P076BShift Solenoid H Performance/Stuck Off
- P076CShift Solenoid H Stuck On
- P076EShift Solenoid H Intermittent
- P076FGear 7 Incorrect Ratio
- P0770Shift Solenoid E
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.