OBD-II code · Powertrain (generic)
P076F Gear 7 Incorrect Ratio
While in 7th gear, the ratio measured between input shaft speed and output shaft speed does not match the calibrated value for that gear. Either a clutch or band is slipping, the wrong gear actually engaged, or speed sensor data is wrong.
Is it safe to drive with P076F?
Usually safe for short trips, but don’t ignore it: the underlying fault can get more expensive over time.
Common causes
- Most likelySlipping clutch in 7th gear element
- PossibleWrong shift solenoid pattern engaging the wrong gear
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Repair at a glance
- Difficulty
- Hard
- DIY friendly
- Best left to a mechanic
- Typical labour
- 3–12 h
- Emissions test
- Usually unaffected
- Parts involved
- Clutch Pack, Friction Band, Speed Sensors
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.