OBD-II code · Powertrain (generic)
P0770 Shift Solenoid E
General fault on shift solenoid E. The TCM detects an electrical or hydraulic anomaly that has not yet been pinned to a specific failure mode.
Is it safe to drive with P0770?
Usually safe for short trips, but don’t ignore it: the underlying fault can get more expensive over time.
Common causes
- Most likelySolenoid electrical or hydraulic fault
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Repair at a glance
- Difficulty
- Hard
- DIY friendly
- Best left to a mechanic
- Typical labour
- 2–8 h
- Emissions test
- Usually unaffected
- Parts involved
- Shift Solenoid E, Valve Body
Related codes
- P075AShift Solenoid G
- P076AShift Solenoid H
- P08CCShift Solenoid J
- P08D5Shift Solenoid K
- P08DEShift Solenoid L
- P2706Shift Solenoid F
- P076DShift Solenoid H Electrical
- P076EShift Solenoid H Intermittent
- P076FGear 7 Incorrect Ratio
- P0771Shift Solenoid E Performance/Stuck Off
- P0772Shift Solenoid E Stuck On
- P0773Shift Solenoid "E" Electrical
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.