OBD-II code · Powertrain (generic)
P075D Shift Solenoid G Electrical
General electrical fault on the shift solenoid G control circuit — open coil, short to ground, short to battery voltage, or driver feedback outside the expected range. The TCM disables this solenoid and falls back to limp-home gear logic to protect the transmission.
Is it safe to drive with P075D?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyOpen solenoid coil
- PossibleDamaged wiring at the transmission case connector
- PossibleATF-soaked connector causing leakage path
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 1–5 h
- Emissions test
- Usually unaffected
- Parts involved
- Shift Solenoid G, Tcm, Wiring Harness
Related codes
- P0753Shift Solenoid A Electrical
- P075BShift Solenoid G Performance/Stuck Off
- P076DShift Solenoid H Electrical
- P08CFShift Solenoid J Electrical
- P08D8Shift Solenoid K Electrical
- P08E1Shift Solenoid L Electrical
- P2709Shift Solenoid F Electrical
- P075AShift Solenoid G
- P075CShift Solenoid G Stuck On
- P075EShift Solenoid G Intermittent
- P075FTransmission Fluid Level Too High
- P0760Shift Solenoid "C" Malfunction
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.