OBD-II code · Powertrain (generic, extended)
P2617 Crankshaft Position Signal Output Circuit / Open
The buffered crankshaft position output that the engine controller sends to ignition modules and the transmission cannot drive its line. Open detected on the output side.
Is it safe to drive with P2617?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyOpen wire between ECU and downstream module
- PossibleOutput buffer internally open
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.8–3.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Control Module, Signal Output Buffer, Wiring Harness
Related codes
- P2614Camshaft Position Output Circuit/Open
- P2615Camshaft A Position Signal Output Circuit Low Bank 1
- P2616Camshaft A Position Signal Output Circuit High Bank 1
- P2618Crankshaft Position Signal Output Circuit Low
- P2619Crankshaft Position Signal Output Circuit High
- P261ACoolant Pump B Control Circuit / Open
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.