OBD-II code · Powertrain (generic, extended)
P2285 Injector Control Pressure Sensor Circuit Low
The voltage of the injector control pressure sensor is below the calibrated minimum. The signal indicates either a short to ground or a sensor that has lost its supply.
Is it safe to drive with P2285?
The car may go into limp mode (reduced power). Get it diagnosed before a long trip.
Common causes
- Most likelySignal shorted to ground
- PossibleOpen 5 V supply
- Less likelyConnector pins corroded - high contact resistance
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–2 h
- Emissions test
- Likely to fail
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Icp Sensor, Icp Wiring
Related codes
- P2282Air Leak Between Throttle Body and Intake Valves
- P2283Injector Control Pressure Sensor Circuit
- P2284Injector Control Pressure Sensor Circuit Range/Performance
- P2286Injector Control Pressure Sensor Circuit High
- P2287Injector Control Pressure Sensor Intermittent
- P2288Injector Control Pressure Too High
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.