OBD-II code · Powertrain (generic, extended)
P2287 Injector Control Pressure Sensor Intermittent
The injector control pressure sensor signal is intermittently lost or out of range. Often caused by intermittent wiring faults or a failing sensor that drops out under vibration or temperature.
Is it safe to drive with P2287?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyIntermittent connector contact
- PossibleSensor failing under load
- Less likelyHarness routed against vibrating component
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–2 h
- Emissions test
- Likely to fail
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Icp Sensor, Icp Wiring
Related codes
- P2284Injector Control Pressure Sensor Circuit Range/Performance
- P2285Injector Control Pressure Sensor Circuit Low
- P2286Injector Control Pressure Sensor Circuit High
- P2288Injector Control Pressure Too High
- P2289Injector Control Pressure Too High - Engine Off
- P228AFuel Pressure Regulator A - Forced Engine Shutdown
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.