OBD-II code · Network (extended)
U3010 Ignition Input Start
Fault on the ignition START input — module does not see start request when cranking, or sees one when not cranking.
Is it safe to drive with U3010?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyStart position contacts worn
- Less likelyGateway module routing CAN messages incorrectly
- Less likelyCAN terminating resistor (120 Ω) drifted out of spec
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–2 h
- Emissions test
- Usually unaffected
- Parts involved
- Ignition Input, Wiring
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.