OBD-II code · Network
U0532 Invalid Data Received From Rain Sensing Module
A receiving module detected implausible data from the rain sensing module. Wetness/intensity values fail plausibility checks and are rejected; auto-wipers may revert to fixed intermittent or off.
Is it safe to drive with U0532?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyModule internal fault or sensor input drift
- PossibleSoftware version mismatch after replacement
- Less likelyGateway module routing CAN messages incorrectly
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Easy
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–1.5 h
- Emissions test
- Usually unaffected
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Rain Sensor Module
Related codes
- U052FInvalid Data Received From Object Detection Maintenance Control Module A
- U0530Invalid Data Received From Object Detection Maintenance Control Module B
- U0531Invalid Data Received From Rear Gate Module
- U0533Invalid Data Received From Side Obstacle Detection Control Module A
- U0534Invalid Data Received From Side Obstacle Detection Control Module B
- U0535Invalid Data Received From Convenience Recall Module
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.