OBD-II code · Network
U0530 Invalid Data Received From Object Detection Maintenance Control Module B
A receiving module detected implausible data from object detection maintenance control module B (radar/camera self-cleaning and calibration manager). Status flags fail plausibility checks and are rejected.
Is it safe to drive with U0530?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyModule internal fault or sensor input drift
- PossibleSoftware version mismatch after replacement
- Less likelyGateway module routing CAN messages incorrectly
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–3 h
- Emissions test
- Usually unaffected
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Object Detection Maintenance Module B
Related codes
- U052FInvalid Data Received From Object Detection Maintenance Control Module A
- U0529Invalid Data Received From Door Window Motor G
- U052AInvalid Data Received From Heated Steering Wheel Module
- U0531Invalid Data Received From Rear Gate Module
- U0532Invalid Data Received From Rain Sensing Module
- U0533Invalid Data Received From Side Obstacle Detection Control Module A
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.