OBD-II code · Network
U050E Invalid Data Received From Wireless Accessory Charging Module B
A receiving module detected implausible data from wireless accessory charging module B (Qi pad in center console / armrest). Coil power or alignment values fail plausibility checks and are rejected.
Is it safe to drive with U050E?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyModule internal fault or sensor input drift
- PossibleSoftware version mismatch after replacement
- Less likelyGateway module routing CAN messages incorrectly
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Easy
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–1.5 h
- Emissions test
- Usually unaffected
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Wireless Charging Module B
Related codes
- U050DInvalid Data Received From Wireless Accessory Charging Module A
- U050BInvalid Data Received From Moveable Roof Control Module B
- U050CInvalid Data Received From Door Control Module H
- U0511Invalid Data Received From Seat Control Module C
- U0512Invalid Data Received From Seat Control Module D
- U0513Invalid Data Received From Yaw Rate Sensor Module
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.