OBD-II code · Network
U0415 Invalid Data Received from ABS Control Module
A control module is communicating with the ABS module but receives implausible data — wrong wheel speeds, checksum errors or out-of-range values. ESP/ESC and traction control deactivate and adaptive cruise control becomes unavailable.
Is it safe to drive with U0415?
Usually safe for short trips, but don’t ignore it: the underlying fault can get more expensive over time.
Common causes
- PossibleABS internal sensor or processing fault
- PossibleWheel speed sensor fault feeding ABS
- Less likelyABS software bug or outdated calibration
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Hard
- DIY friendly
- Best left to a mechanic
- Typical labour
- 1–5 h
- Emissions test
- Usually unaffected
- Parts involved
- ABS Control Module, Wheel Speed Sensor, Can Bus Wiring
Related codes
- U0412Invalid Data Received from Wheel Speed Sensor (Front, Passenger Side)
- U0413Invalid Data Received from Wheel Speed Sensor (Rear, Driver Side)
- U0414Invalid Data Received from 4WD Clutch Control Module
- U0416Invalid Data Received from Vehicle Dynamics Control Module
- U0417Invalid Data Received from Park Assist Control Module
- U0418Invalid Data Received from Brake System Control Module
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.