OBD-II code · Powertrain (generic, extended)
P258E PTO Enable Switch Performance
The PTO enable switch is electrically intact but its state does not match operating conditions — for example asserted while the vehicle is rolling above the PTO speed limit, or asserted/de-asserted in fast succession. The ECM rejects the request to avoid unsafe PTO engagement.
Is it safe to drive with P258E?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelySwitch contact bounce
- PossibleSwitch operated while vehicle is moving
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.3–1.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Pto Enable Switch
Related codes
- P251APTO Enable Switch Circuit/Open
- P258BVacuum Pump Control Circuit A Range/Performance
- P258CVacuum Pump Control Circuit A Low
- P258DVacuum Pump Control Circuit A High
- P258FTorque Management Request Output Signal
- P2590Turbocharger Boost Control Position Sensor B Circuit Intermittent/Erratic
- P2591Cruise Control Front Distance Range Sensor Left
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.