OBD-II code · Powertrain (generic, extended)
P2004 Intake Manifold Runner Control Stuck Open (Bank 1)
The intake manifold runner control (IMRC) flap on bank 1 is stuck in the open position. The IMRC swirls or tumbles intake charge at low rpm by closing one runner per cylinder; when stuck open, low-end torque drops and the engine may misfire on cold starts.
Is it safe to drive with P2004?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyCarbon buildup blocks flap travel
- PossibleIMRC actuator or vacuum motor failed
- PossibleLinkage rod broken or disconnected
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 1–4 h
- Emissions test
- Likely to fail
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Intake Manifold Runner, Imrc Actuator, Intake Manifold
Related codes
- P2005Intake Manifold Runner Control Stuck Open (Bank 2)
- P2001NOx Adsorber Efficiency Below Threshold (Bank 2)
- P2002Diesel Particulate Filter Efficiency Below Threshold (Bank 1)
- P2003Diesel Particulate Filter Efficiency Below Threshold (Bank 2)
- P2006Intake Manifold Runner Control Stuck Closed (Bank 1)
- P2007Intake Manifold Runner Control Stuck Closed (Bank 2)
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.