OBD-II code · Chassis
C0715 Power Steering Pressure Sensor Range/Performance
The power steering module has detected that the hydraulic pressure sensor signal is out of range — relevant for hydraulic and electro-hydraulic systems. Assist regulation may run in fallback mode.
Is it safe to drive with C0715?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyPressure sensor failed
- PossibleLow power steering fluid level
- Less likelySensor element aged beyond calibration window
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–2.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Power Steering Pump, Pressure Sensor, Power Steering Module
Related codes
- P0551Power Steering Pressure Sensor Range/Performance
- C0700Active Steering Module Communication
- C0710Steering Position Signal Malfunction
- C0712Power Steering Position Sensor Range/Performance
- C0720Electric Power Steering Torque Sensor Circuit
- C0725Electric Power Steering Motor Circuit
- C0727Trailer Connector Circuit Malfunction
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.