OBD-II code · Chassis

C05F4 Rear Drive Shaft Speed Sensor Circuit Range/Performance

Rear drive shaft speed sensor reading implausible. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.

Is it safe to drive with C05F4?

The car may go into limp mode (reduced power). Get it diagnosed before a long trip.

Common causes

  • Most likelySensor reading drifted
  • Less likelySensor element aged beyond calibration window
  • Less likelySensor mounting loose - signal damping

Symptoms

  • ABS warning light on
  • ESC/stability control deactivated
  • Possible reduced brake assist
  • Speedometer may behave erratically

Repair at a glance

Difficulty
Medium
DIY friendly
Often, with basic tools
Typical labour
0.5–2 h
Emissions test
Usually unaffected
After the fix
A drive cycle is needed before the light stays off
Parts involved
Rear Drive Shaft Speed Sensor

Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.