OBD-II code · Chassis
C0563 Calibration Mismatch
The chassis control module has detected that stored calibration values do not match the current vehicle configuration — for example after a wheel/tire size change or replacement of an inertial sensor cluster. Stability functions are degraded.
Is it safe to drive with C0563?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyWheel size or sensor cluster mismatch
- Less likelyStored calibration data corrupted
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–2 h
- Emissions test
- Usually unaffected
- Parts involved
- Chassis Control Module, Sensor Cluster, Steering Angle Sensor
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.