OBD-II code · Chassis
C0560 Calibration Required
The chassis control module reports that a sensor or system calibration must be performed — for example after replacement of the steering angle, yaw rate or radar sensor. Affected functions remain disabled until calibration is completed.
Is it safe to drive with C0560?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyRequired calibration not performed after service
- PossibleCalibration drive cycle incomplete
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.3–1.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Steering Angle Sensor, Yaw Rate Sensor, Acc Radar Sensor, Chassis Control Module
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.