OBD-II code · Network
U067C Lost Communication With Fan 3
The vehicle bus reports loss of communication with smart cooling fan 3 (PWM brushless fan with own controller). Fan speed cannot be commanded; cooling falls back to default operation.
Is it safe to drive with U067C?
The car may go into limp mode (reduced power). Get it diagnosed before a long trip.
Common causes
- Most likelyBus wiring open or shorted
- PossibleModule without power or ground
- PossibleModule failed
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–3 h
- Emissions test
- Usually unaffected
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Cooling Fan 3, Vehicle Bus Wiring
Related codes
- U0679Lost Communication With Transmission Fluid Pressure Sensor/Switch A
- U067ALost Communication With Transmission Fluid Pressure Sensor/Switch B
- U067BLost Communication With Engine Disconnect Clutch Pressure Sensor
- U067DLost Communication With Fan 4
- U067ELost Communication With Exhaust Pressure Control Valve B Sensor/Switch
- U067FLost Communication With Barometric Pressure Sensor A
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.