OBD-II code · Network
U0522 Invalid Data Received From Door Switch G
A receiving module detected implausible data from door switch G. Open/closed state or contact bounce values fail plausibility checks and are rejected.
Is it safe to drive with U0522?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyModule internal fault or sensor input drift
- PossibleSoftware version mismatch after replacement
- Less likelyGateway module routing CAN messages incorrectly
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Easy
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–1 h
- Emissions test
- Usually unaffected
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Door Switch G
Related codes
- U0516Invalid Data Received From Door Switch A
- U0517Invalid Data Received From Door Switch B
- U0518Invalid Data Received From Door Switch C
- U0519Invalid Data Received From Door Switch D
- U051AInvalid Data Received From Door Switch E
- U0521Invalid Data Received from Power Steering Control Module
- U0523Invalid Data Received From Door Window Motor A
- U0524Invalid Data Received From Door Window Motor B
- U0525Invalid Data Received From Door Window Motor C
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.