OBD-II code · Network
U0467 Invalid Data Received From Fuel Additive Control Module
A receiving module detected implausible data from the fuel additive control module (typically cerium-based DPF additive on Eolys/PSA systems). Tank level or dosing values fail plausibility checks and are rejected.
Is it safe to drive with U0467?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyModule internal fault or sensor input drift
- PossibleSoftware version mismatch after replacement
- Less likelyGateway module routing CAN messages incorrectly
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–3 h
- Emissions test
- Likely to fail
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Fuel Additive Module
Related codes
- U0464Invalid Data Received From Navigation Control Module
- U0465Invalid Data Received From PTO Control Module
- U0466Invalid Data Received From HVAC Control Module — Rear
- U0468Invalid Data Received From Fuel Cell Control Module
- U0469Invalid Data Received From Starter / Generator Control Module
- U046AInvalid Data Received From Sunroof Control Module
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.