OBD-II code · Network
U041E Invalid Data Received From All Wheel Drive Control Module
A receiving module detected implausible data from the AWD control module. Torque distribution or clutch position values fail plausibility checks and are rejected.
Is it safe to drive with U041E?
The car may go into limp mode (reduced power). Get it diagnosed before a long trip.
Common causes
- Most likelyModule internal fault or sensor input drift
- PossibleSoftware version mismatch after replacement
- Less likelyGateway module routing CAN messages incorrectly
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–3 h
- Emissions test
- Usually unaffected
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Awd Control Module
Related codes
- U041BInvalid Data Received From Exhaust Gas Sensor Module A
- U041CInvalid Data Received From Rocker Arm Control Module A
- U041DInvalid Data Received From Rocker Arm Control Module B
- U041FInvalid Data Received From Throttle Actuator B Control Module
- U0420Invalid Data Received from Power Steering Control Module
- U0421Invalid Data Received from Throttle/Pedal Position Sensor
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.