OBD-II code · Network
U0328 Software Incompatibility With Steering Angle Sensor Module
A module reports a software version mismatch with the steering angle sensor module — typically after replacing one of the modules without programming the new unit to match the rest of the network.
Is it safe to drive with U0328?
The car may go into limp mode (reduced power). Get it diagnosed before a long trip.
Common causes
- Most likelyModule replaced without programming
- PossibleWrong part number for the vehicle
- Less likelyGateway module routing CAN messages incorrectly
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–2 h
- Emissions test
- Usually unaffected
- Parts involved
- Steering Angle Sensor Module
Related codes
- U0325Software Incompatibility with Auxiliary Heater Control Module
- U0326Software Incompatibility With Vehicle Immobilizer Control Module
- U0327Software Incompatibility with Powertrain Control Module
- U0329Software Incompatibility With Steering Column Control Module
- U032ASoftware Incompatibility With A/C Compressor Control Module
- U0330Software Incompatibility With Tire Pressure Monitor Module
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.