OBD-II code · Network

U0143 Lost Communication with Body Control Module C

A third body control module (BCM "C") has dropped off the bus. Comfort, lighting or door functions on the affected zone stop working.

Is it safe to drive with U0143?

Usually safe for short trips, but don’t ignore it: the underlying fault can get more expensive over time.

Common causes

  • Most likelyBCM C unpowered
  • Less likelyGateway module routing CAN messages incorrectly
  • Less likelyCAN terminating resistor (120 Ω) drifted out of spec

Symptoms

  • Multiple warning lights may illuminate
  • Affected modules may go into limp mode or shut down
  • Specific functions inoperative depending on module
  • Diagnostic tools may show communication faults

Repair at a glance

Difficulty
Hard
DIY friendly
Best left to a mechanic
Typical labour
0.5–5 h
Emissions test
Usually unaffected
Parts involved
Body Control Module, Can Bus Wiring

Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.