OBD-II code · Network
U007A Control Module Communication Bus H Off
The control module communication bus H is off — the gateway has shut down or isolated this bus, often due to repeated bus errors or a "bus off" event in the CAN controller.
Is it safe to drive with U007A?
The car may go into limp mode (reduced power). Get it diagnosed before a long trip.
Common causes
- Most likelyCAN controller in bus-off state from repeated errors
- Less likelyGateway module routing CAN messages incorrectly
- Less likelyCAN terminating resistor (120 Ω) drifted out of spec
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Repair at a glance
- Difficulty
- Hard
- DIY friendly
- Best left to a mechanic
- Typical labour
- 1–6 h
- Emissions test
- Usually unaffected
- Parts involved
- Bus H Gateway, Bus H Wiring
Related codes
- U007BControl Module Communication Bus I Off
- U007CControl Module Communication Bus J Off
- U007DControl Module Communication Bus K Off
- U007EControl Module Communication Bus L Off
- U007FControl Module Communication Bus M Off
- U0077Vehicle Communication Bus B Off
- U0078Vehicle Communication Bus B (+) Open
- U0079Vehicle Communication Bus B (+) Low
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.