OBD-II code · Network

U0047 Vehicle Communication Bus C Performance

Bus C is electrically OK but message rate or error counters are outside spec. Often intermittent wiring or a degraded transceiver.

Is it safe to drive with U0047?

Usually safe for short trips, but don’t ignore it: the underlying fault can get more expensive over time.

Common causes

  • Most likelyWiring chafed or marginal
  • Less likelyGateway module routing CAN messages incorrectly
  • Less likelyCAN terminating resistor (120 Ω) drifted out of spec

Symptoms

  • Multiple warning lights may illuminate
  • Affected modules may go into limp mode or shut down
  • Specific functions inoperative depending on module
  • Diagnostic tools may show communication faults

Repair at a glance

Difficulty
Hard
DIY friendly
Best left to a mechanic
Typical labour
1–5 h
Emissions test
Usually unaffected
After the fix
A drive cycle is needed before the light stays off
Parts involved
Bus C Wiring

Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.