OBD-II code · Powertrain (generic, extended)
P2AE0 Intake Air O2 Sensor Pumping Current Trim Circuit Open Bank 1
The trim adjustment for the pumping current of the intake air oxygen sensor on bank 1 reports a circuit open condition. Wide-band lambda regulation on the intake side is impaired.
Is it safe to drive with P2AE0?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyOpen in pump current wire
- PossibleInternal open in pump cell
- Less likelyPin pushed back out of connector body
Symptoms
- Check engine light on
- Increased fuel consumption
- Possible rough idle or hesitation
- Failed emissions test
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–3 h
- Emissions test
- Likely to fail
- After the fix
- A drive cycle is needed before the light stays off
- Parts involved
- Intake Air O2 Sensor B1, Wiring Harness, Ecm
Related codes
- P2AE9Intake Air O2 Sensor Pumping Current Trim Circuit Open Bank 2
- P2ADDReductant Tank Temperature Sensor B Circuit Intermittent/Erratic
- P2ADEReductant Tank Temperature Sensor B Circuit
- P2ADFIntake Air System Leak Bank 2
- P2AE1Intake Air O2 Sensor Pumping Current Trim Circuit Low Bank 1
- P2AE2Intake Air O2 Sensor Pumping Current Trim Circuit High Bank 1
- P2AE3Intake Air O2 Sensor Pumping Current Circuit Open Bank 1
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.