OBD-II code · Powertrain (generic, extended)
P2822 Pressure Control Solenoid J Electrical
The TCM detects an electrical fault on transmission pressure control solenoid J. Hydraulic pressure cannot be modulated as expected, causing harsh or slipping shifts.
Is it safe to drive with P2822?
The car may go into limp mode (reduced power). Get it diagnosed before a long trip.
Common causes
- Most likelyInternal solenoid fault
- PossibleWiring or connector fault
Repair at a glance
- Difficulty
- Hard
- DIY friendly
- Best left to a mechanic
- Typical labour
- 2–8 h
- Emissions test
- Usually unaffected
- Parts involved
- Pressure Control Solenoid J, Tcm, Transmission Wiring
Related codes
- P08C6Pressure Control Solenoid M Electrical
- P2716Pressure Control Solenoid D Electrical
- P2725Pressure Control Solenoid E Electrical
- P2734Pressure Control Solenoid F Electrical
- P27BBPressure Control Solenoid N Electrical
- P27C3Pressure Control Solenoid P Electrical
- P27CBPressure Control Solenoid R Electrical
- P27D3Pressure Control Solenoid S Electrical
- P27DBPressure Control Solenoid T Electrical
- P2810Pressure Control Solenoid G Electrical
- P2819Pressure Control Solenoid H Electrical
- P282BPressure Control Solenoid K Electrical
- P281FPressure Control Solenoid J
- P2820Pressure Control Solenoid J Performance/Stuck Off
- P2821Pressure Control Solenoid J Stuck On
- P2823Pressure Control Solenoid J Intermittent
- P2824Pressure Control Solenoid J Control Circuit/Open
- P2825Pressure Control Solenoid J Control Circuit Range/Performance
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.