OBD-II code · Powertrain (generic, extended)
P26FF Auto Configuration Throttle Input Not Present Bank 2
During controller auto-configuration the expected throttle input on bank 2 was not detected. Configuration cannot complete and the second throttle path cannot be used.
Is it safe to drive with P26FF?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyBroken signal wire from throttle B2
- PossibleHardware variant mismatch — sensor not installed
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.8–3 h
- Emissions test
- Usually unaffected
- Parts involved
- Throttle Position Sensor B2, Control Module, Wiring Harness
Related codes
- P063EAuto Configuration Throttle Input Not Present Bank 1
- P26FCEGR Cooler Bypass Control Stuck Closed Bank 2
- P26FDA/C Compressor Internal Control Module Performance
- P26FEExhaust Flow Control Valve A Control Performance
- P2700Transmission Friction Element A Apply Time Range/Performance
- P2701Transmission Friction Element B Apply Time Range/Performance
- P2702Transmission Friction Element C Apply Time Range/Performance
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.