OBD-II code · Powertrain (generic, extended)
P2672 Injection Pump Timing Offset
The high-pressure injection pump timing is offset from the expected reference. On distributor pumps with a timing solenoid, the actuator does not match the commanded position.
Is it safe to drive with P2672?
Usually safe for short trips, but don’t ignore it: the underlying fault can get more expensive over time.
Common causes
- Most likelyWorn timing actuator piston or seal
- PossibleStretched pump drive chain or belt
Repair at a glance
- Difficulty
- Hard
- DIY friendly
- Best left to a mechanic
- Typical labour
- 3–8 h
- Emissions test
- Usually unaffected
- Parts involved
- Injection Pump, Timing Actuator
Related codes
- P266FA/C Refrigerant Distribution Valve A Control Circuit Driver Current/Temperature Too High
- P2670Actuator Supply Voltage B Circuit Low
- P2671Actuator Supply Voltage B Circuit High
- P2673Injection Pump Timing Calibration Not Learned
- P2674Injection Pump Fuel Calibration Not Learned
- P2675Air Cleaner Inlet Control Circuit / Open
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.