OBD-II code · Powertrain (generic, extended)
P25A7 Fuel Mode Select Switch Circuit High
Fuel mode switch input reads stuck high — short to battery voltage. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive with P25A7?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelySwitch wire shorted to battery voltage
- Less likelyConnector pins corroded - high contact resistance
- Less likelySupply wire pinched against B+ source
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.3–1.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Fuel Mode Switch
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.