OBD-II code · Powertrain (generic, extended)
P2267 Water in Fuel Sensor A Circuit High
Water-in-fuel sensor reads above upper plausibility — open signal or short to B+. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive with P2267?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyOpen signal line
- Less likelyConnector pins corroded - high contact resistance
- Less likelySupply wire pinched against B+ source
Repair at a glance
- Difficulty
- Easy
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.3–1.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Water In Fuel Sensor
Related codes
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.