OBD-II code · Powertrain (generic)
P0D4E Battery Charger Hybrid/EV Battery Output Voltage Sensor Circuit Low
The ECM detects a low fault on the battery charger hybrid/ev battery output voltage sensor circuit. Reading cannot be used reliably for control.
Is it safe to drive with P0D4E?
The car may go into limp mode (reduced power). Get it diagnosed before a long trip.
Common causes
- Most likelySignal wire shorted to ground
- PossibleInternal sensor short
- Less likelyConnector pins corroded - high contact resistance
Symptoms
- EV/hybrid system warning light on
- Reduced power output or limp mode
- Charging may fail or be slowed
- Reduced electric range
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 1–4 h
- Emissions test
- Usually unaffected
- Parts involved
- Battery Charger Hv Output Voltage Sensor, Wiring Harness, Bms
Related codes
- P0D4BBattery Charger 14 Volt Output Current Sensor Circuit Intermittent/Erratic
- P0D4CBattery Charger Hybrid/EV Battery Output Voltage Sensor Circuit
- P0D4DBattery Charger Hybrid/EV Battery Output Voltage Sensor Circuit Range/Performance
- P0D4FBattery Charger Hybrid/EV Battery Output Voltage Sensor Circuit High
- P0D50Battery Charger Hybrid/EV Battery Output Voltage Sensor Circuit Intermittent/Erratic
- P0D51Battery Charger Hybrid/EV Battery Output Current Sensor Circuit
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.