OBD-II code · Powertrain (generic)
P0CCE Charge Port Door A Position Sensor Circuit Low
The charge port door A position sensor reports a low fault. Door state cannot be verified reliably. The on-board charger negotiates voltage, current and safety with the EVSE; a fault interrupts charging or limits it to AC slow-charge despite a DC fast charger being attached.
Is it safe to drive with P0CCE?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelySignal wire shorted to ground
- PossibleInternal sensor short
- Less likelyConnector pins corroded - high contact resistance
Symptoms
- Charge status indicator shows fault
- Charging may not start or interrupts
- Slower-than-expected charge rate
Repair at a glance
- Difficulty
- Easy
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.3–2 h
- Emissions test
- Usually unaffected
- Parts involved
- Charge Port Door A Position Sensor, Wiring Harness, Bms
Related codes
- P2E9ACharge Port Door B Position Sensor Circuit Low
- P0CCBCharge Port Door A Open Request Switch Circuit Intermittent/Erratic
- P0CCCCharge Port Door A Position Sensor Circuit
- P0CCDCharge Port Door A Position Sensor Circuit Performance
- P0CCFCharge Port Door A Position Sensor Circuit High
- P0CD0AC Plug Voltage Sense Circuit
- P0CD1Charge Port Door A Unlock Control Circuit
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.