OBD-II code · Powertrain (generic)
P0833 Clutch Pedal Switch B Circuit
General electrical fault on the second clutch pedal switch B — provides redundant clutch-state detection (one switch upper end of pedal travel, other lower end) so the ECM can verify both ends of pedal motion. Used for accurate cranking and cruise enable logic.
Is it safe to drive with P0833?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyOpen or shorted switch wire
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Repair at a glance
- Difficulty
- Easy
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.2–1 h
- Emissions test
- Usually unaffected
- Parts involved
- Clutch Pedal Switch B, Wiring Harness
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.