OBD-II code · Powertrain (generic)
P0827 Up and Down Shift Switch Circuit Low
Up/down shift switch input reads stuck low — short to ground or stuck-pressed paddle/button. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive with P0827?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelySwitch wire shorted to ground
- PossibleStuck paddle/button
- Less likelyConnector pins corroded - high contact resistance
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.4–1.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Paddle Shifters
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.