OBD-II code · Powertrain (generic)
P07D5 Transmission Mode Switch F Circuit Low
Mode switch F input reads stuck low. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive with P07D5?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelySwitch wire shorted to ground
- Less likelyConnector pins corroded - high contact resistance
- Less likelyHarness chafing through insulation
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.3–1.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Transmission Mode Switch F
Related codes
- P071BTransmission Mode Switch A Circuit Low
- P071ETransmission Mode Switch B Circuit Low
- P07CCTransmission Mode Switch C Circuit Low
- P07CFTransmission Mode Switch D Circuit Low
- P07D2Transmission Mode Switch E Circuit Low
- P07D4Transmission Mode Switch F Circuit
- P07D3Transmission Mode Switch E Circuit High
- P07D6Transmission Mode Switch F Circuit High
- P07D7Stuck in Gear 8
- P07D8Unable To Engage Gear 8
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.