OBD-II code · Powertrain (generic)

P06ED Engine RPM Output Circuit Low

Same as P0654 with the output line shorted to ground. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.

Is it safe to drive with P06ED?

Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.

Common causes

  • Most likelyOutput line shorted to ground
  • Less likelyConnector pins corroded - high contact resistance
  • Less likelyHarness chafing through insulation

Symptoms

  • Check engine light on
  • Possible limp mode or no-start
  • Multiple follow-up faults across modules
  • Reset/relearn may be needed after repair

Repair at a glance

Difficulty
Easy
DIY friendly
Often, with basic tools
Typical labour
0.3–1.2 h
Emissions test
Usually unaffected
Parts involved
Engine Rpm Output

Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.