OBD-II code · Powertrain (generic)
P05BF Stop-Start Mode Switch Circuit High
Same as P05BC with the signal shorted to supply. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive with P05BF?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelySignal shorted to supply
- Less likelyConnector pins corroded - high contact resistance
- Less likelySupply wire pinched against B+ source
Repair at a glance
- Difficulty
- Easy
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.3–1.2 h
- Emissions test
- Usually unaffected
- Parts involved
- Stop Start Switch
Related codes
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.