OBD-II code · Powertrain (generic)
P0367 Camshaft Position Sensor B Circuit Low (Bank 1)
Cam sensor B on bank 1 below lower plausibility — short to ground. The camshaft position sensor identifies which cylinder is on the compression stroke — without it the ECM cannot run sequential injection or coil-on-plug ignition correctly.
Is it safe to drive with P0367?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyShort to ground
- Less likelyConnector pins corroded - high contact resistance
- Less likelyHarness chafing through insulation
Symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–2.5 h
- Emissions test
- Likely to fail
- Parts involved
- Camshaft Position Sensor
Related codes
- P0347Camshaft Position Sensor A Circuit Low (Bank 2)
- P0365Camshaft Position Sensor B Circuit (Bank 1)
- P0392Camshaft Position Sensor B Circuit Low (Bank 2)
- P0364DC/AC Converter Control Module Control Circuit Range/Performance
- P0366Camshaft Position Sensor B Circuit Range/Performance (Bank 1)
- P0368Camshaft Position Sensor B Circuit High (Bank 1)
- P0369Camshaft Position Sensor B Circuit Intermittent (Bank 1)
- P036AIgnition G Control Signal Circuit/Open
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.