OBD-II code · Powertrain (generic)
P02FC Cold Start Fuel Injection Control Circuit Low
Cold-start injector drive line stuck low — short to ground. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive with P02FC?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyShort to ground
- Less likelyConnector pins corroded - high contact resistance
- Less likelyHarness chafing through insulation
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–2.5 h
- Emissions test
- Likely to fail
- Parts involved
- Cold Start Injector
Related codes
- P02FBCold Start Fuel Injection Control Circuit/Open
- P02F9Cylinder 12 Injector Circuit Range/Performance
- P02FADiesel Intake Air Flow Position Sensor Minimum/Maximum Stop Performance
- P02FDCold Start Fuel Injection Control Circuit High
- P02FECold Start Fuel Injection Control Circuit Range/Performance
- P02FFPropulsion System Inactive Timer Performance
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.