OBD-II code · Powertrain (generic)
P018D Fuel Pressure Sensor B Circuit High
Fuel pressure sensor B signal voltage above expected range. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive with P018D?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelySignal wire open
- Less likelyConnector pins corroded - high contact resistance
- Less likelySupply wire pinched against B+ source
Symptoms
- Check engine light on
- Hard start, no start, or stalling under load
- Power loss especially at high load or rpm
- Possible long cranking time
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Often, with basic tools
- Typical labour
- 0.5–2 h
- Emissions test
- Likely to fail
- Parts involved
- Fuel Pressure Sensor B, Sensor Wiring
Related codes
- P01C6Fuel Pressure Sensor A Circuit High
- P018AFuel Pressure Sensor B Circuit
- P018BFuel Pressure Sensor B Circuit Range/Performance
- P018CFuel Pressure Sensor B Circuit Low
- P018EFuel Pressure Sensor B Circuit Intermittent/Erratic
- P018FFuel System Over Pressure Relief Valve Frequent Activation
- P0190Fuel Rail Pressure Sensor Circuit
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.