OBD-II code · Chassis
C0615 ESC Calibration Required
ESC calibration values are missing or implausible after sensor or module replacement.
Is it safe to drive with C0615?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyCalibration not performed after repair
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Repair at a glance
- Difficulty
- Easy
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.3–1.5 h
- Emissions test
- Usually unaffected
- Parts involved
- ABS Control Module, Yaw Rate Sensor, Lateral G Sensor, Steering Angle Sensor
Related codes
- C0612Right Park Brake Actuator Control Circuit High
- C0613Right Park Brake Actuator Performance/Stuck Off
- C0614Right Park Brake Actuator Stuck On
- C0616Park Brake Control Module Control Circuit Performance
- C0617Park Brake Control Module Control Circuit Low
- C0618Park Brake Control Module Control Circuit High
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.