OBD-II code · Chassis
C060D Left Park Brake Actuator Control Circuit High
Left EPB actuator control voltage above expected range. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive with C060D?
The car may go into limp mode (reduced power). Get it diagnosed before a long trip.
Common causes
- Most likelyWiring shorted to battery
- Less likelyConnector pins corroded - high contact resistance
- Less likelySupply wire pinched against B+ source
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.5–3 h
- Emissions test
- Usually unaffected
- Parts involved
- Left Epb Actuator
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.