OBD-II code · Chassis
C0583 Park Brake Release Performance
The EPB module has detected that the release operation took longer than expected or did not fully release. The vehicle should not be driven until the brake is fully released to avoid pad damage.
Is it safe to drive with C0583?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelyActuator corroded or sluggish
- PossibleBrake pads seized to disc after long standstill
- PossibleLow system voltage during release
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.8–3 h
- Emissions test
- Usually unaffected
- Parts involved
- Epb Actuator, Epb Module, Brake Pads, Vehicle Power Supply
Related codes
- C0580Brake Booster Motor A Phase U-V-W Circuit Low
- C0581Park Brake Apply Performance
- C0582Brake Booster Motor A Phase U-V-W Circuit Range/Performance
- C0584Brake Booster Motor B Phase U-V-W Circuit Low
- C0585Brake Booster Motor B Phase U-V-W Circuit High
- C0586Brake Booster Motor B Phase U-V-W Circuit Range/Performance
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.