OBD-II code · Chassis
C0295 Steering Sensor Indicates Bias
The stability control module has detected that the steering wheel position sensor reports a non-zero angle when the vehicle is driving straight. This bias makes ESP intervene incorrectly and the system requires recalibration.
Is it safe to drive with C0295?
Usually safe to drive in the short term. Get it diagnosed when convenient, sooner if the car drives differently.
Common causes
- Most likelySteering angle sensor calibration required
- PossibleWheel alignment incorrect
- Less likelySteering angle sensor failed
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Repair at a glance
- Difficulty
- Medium
- DIY friendly
- Best left to a mechanic
- Typical labour
- 0.3–2.5 h
- Emissions test
- Usually unaffected
- Parts involved
- Steering Angle Sensor, Esp Control Module, Alignment Components
Code data: OBDex open dataset (CC0). Labour times are typical ranges, not a quote.